Operating instructions

GROUNDING INSTRUCTIONS
CADET 98626 08/25/04
2-3
THIS PRODUCT IS FOR COMMERCIAL USE ONLY.
ELECTRICAL:
In the USA this machine operates on a standard 15 amp 115V,
60 hz, A.C. power circuit . The amp, hertz, and voltage are
listed on the data label found on each machine. Using voltages
above or below those indicated on the data label will cause
serious damage to the motors.
GROUNDING INSTRUCTIONS:
This appliance must be grounded. If it should malfunction or
break down, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This
appliance is equipped with a cord having an equipment-
grounding conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
This appliance is for use on a nominal 115-volt circuit, and has a
grounded plug that
looks like the plug in “Fig. A”. A temporary adaptor that looks
like the adaptor in “Fig . C” may be used to connect this plug to
a 2-pole receptacle as shown in “Fig. B”, if a properly grounded
outlet is not available. The temporary adaptor should be used
only until a properly grounded outlet (Fig. A) can be installed by
a qualified electrician. The green colored rigid ear, lug, or the
like extending from the adaptor must be connected to a
permanent ground such as a properly grounded outlet box cover.
Whenever the adaptor is used, it must be held in place by a
metal screw.
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to whether
the outlet is properly grounded. Do not modify the plug provided
with the appliance - if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
!
WARNING:
NOTE: In Canada, the use of a temporary adaptor is no
t
ermitted by the Canadian Electrical Code
PROPER GROUNDING
Metal Screw
A
daptor
Grounded Outlet Box
Fig. A
Fig. B
Fig. C
Tab For Grounding Screw
Grounded
Outlet
Grounding Pin
A
dapto
r