Operating instructions

OPERATIONS
Select intermittent or continuous switch
setting to turn on brush and start solution
spray.
The intermittent setting requires the
operator to hold the switch in the “on”
position with the thumb, and is typically
used in small areas where short cleaning
passes are made.
The continuous setting allows the operator
to set the switch in the “on” position with
one touch, and is typically used in large
areas where long cleaning passes are
made.
Lower machine to floor.
STEP
5
Tip machine back by main handle to move
to starting point.
STEP
6
STEP
7
INTERMITTENT
CONTINUOUS
CADET 86038220 03/16/07
3-7