Carpet Maintainer Operating Instructions

OPERATIONS
86269870 08/20/08
3-3
MACHINE OPERATION
PRE-RUN INSPECTION
Perform a pre-run inspection to find possible
problems that could cause poor performance or
lost time from breakdown. Check the rating plate
to confirm voltage and frequency is the same as
the power supply. NOTE: A 10% variation in
voltage is acceptable.
STARTING MACHINE
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make
sure that all covers are in place and secured
properly.
1. Connect the machine to a power supply.
2. Release the handle lock.
3. (a) Press green button to power on the
machine,120V only.
(b) Set black on/off switch to “on” position,
230V only.
4. Press green button to start brushes.
After applying a light spray of diluted interim
carpet cleaner onto the carpet using a pressurized
tank sprayer, commence cleaning by pushing and
pulling the machine slowly over the wetted carpet.
Move the machine in multiple directions and
overlapping strokes.
For best results use Windsor iCapsol or Prochem
ProCaps products.
STARTING MACHINE – DELUXE
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make
sure that all covers are in place and secured
properly.
1. Connect the machine to a power supply.
2. Release the handle lock.
3. (a) Press green button to power on machine,
120V only.
(b) Set black on/off switch to “on” position,
230V only.
4. Press green button to start brushes.
5. Press and hold blue button to spray chemical.
Once machine is plugged in spray function is
operational.
Apply a light spray of diluted interim carpet
cleaner onto the carpet using the onboard
spraying system. Spray chemical while pushing
the machine forward. Brush the chemical into the
carpet while pulling the machine slowly over the
wetted carpet. Move the machine in multiple
directions and overlapping strokes.
For best results use Windsor iCapsol or Prochem
ProCaps products.
Flammable materials can cause an explosion or
fire. Do not use flammable materials with this
machine.
! WARNING