Carpet Maintainer Operating Instructions

OPERATIONS
86269870 07/11/07
3-2
HOW THE MACHINES WORK
The Carpet Maintainer is designed to maintain your
carpet using the Quick Dry Carpet Care System. By
using the Carpet Maintainer in conjunction with
iCapsol or Prochem ProCaps chemical solution, you
can perform a regular light cleaning and grooming of
your carpet very quickly, and have the carpet dry
and ready for traffic within 20 minutes.
The handle movement flexibility allows the machine
to clean under low furniture. There is a hand
operated on/off switch and auto-handle lock keeping
the handle in an upright position. This unit is
equipped with a safety feature that when unplugged
from the wall or the handle dropped, will
automatically reset to the off position .
The debris tray is used to catch unwanted carpet
debris and should be cleaned regularly and prior to
transporting.
This appliance conforms with international and
national safety directives: EN55014-2, EN5504-1,
EN61000-3-2/3-3, EN60335-1/2-10/2-69/2-67. IEC
60335-1/2/10/2-67/2-69. LVD 73/23/EEC.
DELUXE
This unit is equipped with an onboard spray pump
and solution tank. By using the onboard spraying
system a light treatment of chemical can be applied
to the carpet and brushed in during a single pass of
the machine.
QUICK DRY CARPET CARE SYSTEM
INSTRUCTIONS
Test for colorfastness in an inconspicuous area
before use.
1. Vacuum carpet to remove loose soil.
2. Dilute iCapsol or Prochem ProCaps at 8oz. per
gallon of water (1:16) into the solution tank.
3. Pre-spray carpet to be cleaned at a rate of 600–
1000 sq. ft. per gallon of diluted solution. Do not
over wet.
4. No dwell time is required. Do not allow
chemical to dry before brushing.
5. Brush treated area to emulsify soils using
the Windsor iCapsol or other carpet-
brushing machine.
6. Allow to dry until dry to touch (approximately
20 minutes) before opening area to traffic.
7. Vacuum carpet when fully dry to remove
encapsulated soil.
Tips: Pre-treat carpet spots with iCapsol Interim
cleaning solution. Work on a manageable area
and do not allow cleaning solution to dry on
carpet before brushing.
DELUXE
The Deluxe is provided with a removable
solution tank. To remove tank for filling and
cleaning, press the gray release button on the
blue coupler located at the top of the tank. Next
remove upper straps from mounting pegs. The
tank will now freely separate from the machine
base. After filling tank remount to machine by
reversing the process mentioned above.
The proper 1:16 dilution ratio can be achieved
by adding one pint (16 oz.) of recommended
chemical and slowly filling the tank with water (2
gallons). Adding water slowly will help prevent
foaming.
To achieve a coverage rate of 600–1000 sq. ft.
per gallon using the onboard sprayer, spray
solution only during the forward stroke of
operation. Use the backstroke to brush the
chemical into the carpet.