MINI-EXTRACTOR Operating Instructions (GB/USA) 120V MODELS ONLY E 86221950 04/27/07 PRV NO.
MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ DEALER NAME ________________________________ OPERATIONS GUIDE NUMBER ___________________ PUBLISHED __________________________________________ YOUR DEALER Name: _______________________________________________________________________________ Address: _____________________________________________________
TABLE OF CONTENTS Machine Data Log/Overview................................2 Table of Contents.................................................3 HOW TO USE THIS MANUAL How to use this Manual........................................1-1 SAFETY GROUP PARTS LIST Extractor Group. ...................................................... 5-1 Solution Pump Group. ............................................. 5-3 Wiring Diagram........................................................ 5-5 Hand Tool......................
HOW TO USE THIS MANUAL The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information: This manual contains the following sections: - - HOW TO USE THIS MANUAL SAFETY OPERATIONS MAINTENANCE PARTS LIST - The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts. - Parts may be ordered from authorized dealers.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. ! WARNING: To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments.
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: ! WARNING WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
GROUNDING INSTRUCTIONS THIS PRODUCT IS FOR COMMERCIAL USE ONLY. ELECTRICAL: In the USA this machine operates on a standard 15 amp 115V, 60 hz, A.C. power circuit. The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.
MACHINE OPERATIONS SET UP AND OPERATION 1. Upon removing your new mini-extractor from the box, loosen the latch at back end of the machine that secures the recovery tank to the solution tank. Remove the recovery tank from the solution tank. 2. Pour clean, hot water to the indicated fill line of the solution tank. To avoid possible tank distortion, water temperature must not exceed 140 F (60C). 3.
MAINTENANCE DAILY MAINTENANCE: Follow same procedure for Shut Down and Storage. VACUUM MOTOR REPLACEMENT: 1. Turn off all switches and unplug machine. PERIODIC MAINTENANCE: 1. Twice a month, flush a white vinegar solution (one quart vinegar to two gallons water) or antibrowning solution (mixed as directed) through the extractor. This will prevent build-up of alkaline residue in the system. 2. If spray jet becomes clogged, remove the spray tip, wash it thoroughly, and blow dry.
TROUBLESHOOTING TROUBLESHOOTING PROBLEM. Little or no solution flow CAUSE SOLUTION Clogged spray jet on cleaning tool Remove and clean jets Check and replace pump. Faulty pump Loss of vacuum/ Solution recovery 4-2 Incorrectly attached solution hose Incorrectly attached vac hose Obstruction in cleaning tool Recovery tank is not securely mounted on the solution tank. Ensure solution hose coupler is securely attached to the coupler on the solution tank.
NOTES 86221950 04/27/07 4-3
EXTRACTOR GROUP 13 48 15 14 86226140 PRV NO. 880434 (REF) 86226130 PRV NO. 880433 (REF) 1 2 230V MODELS ONLY 47 PART OF ITEM 16 3 11 4 8 9 10 12A 12B 21 5 8 9 6 7A 7B 8 9 17 22 23 27 19 18 39 20 25 24 26 86226310 PRV NO.
EXTRACTOR GROUP REF PART NO. PRV NO.
SOLUTION PUMP GROUP 1 9 5 6 2 5 3 4 4 7A 7B 3 5 8 5-3 86221950 02/20/07
SOLUTION PUMP GROUP REF PART NO. PRV NO. QTY DESCRIPTION 1 86275710 70528 2 2 3 4 5 86068690 86237530 86197590 86233150 140172 35187 40031 20042 1 3 2 3 6 86240290 39714 1 7A 86201110 250-78 1 SCREW, 10-32 X 3/8 PPH EXSEMS BRACKET, SOLENOID PUMP GASKET, TUBE SEAL HOSEBARB, 1/8 MPT 3/8 90° CLAMP, HOSE HOSE, 3/8ID WIREBOUND X 2.6” PUMP, 110/120V 60HZ FLOJET 7B 86201120 250-78A 1 PUMP, 220/240V 50 HZ FLOJET 8 86281310 39326 1 9 86010640 87016 2 SERIAL NO.
WIRING DIAGRAM CIRCUIT BREAKER BLK WHT BLK WHT GRN 4 1 SWITCH BLK VAC BLK 1 9 10 GRN 2 BLK WHT PUMP 3 120V MACHINES CAPACITOR CIRCUIT BREAKER LOAD FILTER LINE 8 BLU GRN BLK WHT BLK BRN GRN 7 5 6 SWITCH 1 BLK VAC BLK 1 GRN 9 10 BLK PUMP 230V MACHINES 5-5 86221950 02/20/07 2 WHT 3
WIRING PARTS LIST REF PART NO. PRV NO. QTY 1 2 3 4 5 6 7 8 9 10 86226310 86226100 86226110 86226120 86226130 86226140 86226160 86226150 86006770 86010640 88884 880430 880431 880432 880433 880434 880436 880435 70323 87016 2 1 1 1 1 1 1 1 1 1 DESCRIPTION SERIAL NO.
HAND TOOL 1 3 2 5 6 7 8 4 5-7 86221950 02/20/07
HAND TOOL REF PART NO. PRV NO. 1 86219340 41536 2 3 4 5 86225670 86219020 86200810 86219570 84200 39712 270-11 44100 6 86223100 629998 7 8 86221910 86218000 54202 34438 - 86218790 HTO DESCRIPTION SERIAL NO.
MINI CART 1 2 3 4 5-9 86221950 02/20/07
MINI CART REF PART NO. 1 2 3 4 86222950 86259770 86137280 86136640 86222030 - PRV NO. DESCRIPTION 62846 89086 87054 70262 PMCT PLATE, WELDMENT WHEEL, 5”D X 1” X .5” ID GRY WASHER, M8 FLAT DIN125A PLT SCR, M8 X 20 HHMS PLTD MINI CART 86221950 02/20/07 SERIAL NO.
CART 5-11 86221950 02/20/07
CART REF PART NO. PRV NO. 1 2 3 4 5 6 7 8 9 10 11 - 86089270 86273740 86271380 86005700 86259970 86005680 86092130 86006590 86228340 86232530 86010630 86000030 78310 70010 57196 57104 89507 57047 27637 70088 140088 18010 87013 PCT DESCRIPTION TUBE, CART HANDLE SCREW, 1/4-20 X 1.5 TAP PLTD. NUT, 1/2 STAR LOCK PUSH-ON NUT, 10-32 HEX W/ STAR WASHER WHEEL, 8” GREY NUT, 1/4-20 LOCK CART BASE ASM, SPOTTER SCREW, 10-32 X 1/2 PPHMS SS NP BASKET, CART CASTER, 2.
SUGGESTED SPARE PARTS REF PART NO. PRV NO. DESCRIPTION 1 2 3 4 5 6 7 86225110 86258440 86225500 86201110 86201120 86135320 86135330 72194 53137 53813 250-78 250-78A 140687 140688 SWITCH, DPST 250V 16(4) SPLASH VAC MOTOR, 120V 2ST LNP VAC MOTOR, 230V 2ST LNP PUMP, 110/120 60HZ FLOJET PUMP, 220/240V 50HZ FLOJET BRUSH SET, 120V VAC, WINDSOR BRUSH SET, 230V VAC, WINDSOR 5-13 86221950 02/20/07 SERIAL NO.