AUTOMATIC SCRUBBER MODELS: SCC172 10066320 QSCC172 10066300 SCHC172 10066330 HCC172 10066270 QSCC172IA 10066310 QSC172 10052700 IPX4 Read these instructions before using the machine V 86221970 09/20/10 PRV NO 980282
MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ YOUR DEALER Name: ________________________________________________________________________________________________ Address: ______________________________________________________________________________________________ Phone Number: _____________________________________________________________________
TABLE OF CONTENTS Machine Data Log/Overview................................2 Table of Contents.................................................3 HOW TO USE THIS MANUAL How to use this Manual........................................1-1 SAFETY Important Safety Instructions ...............................2-1 Hazard Intensity Level..........................................2-2 Safety Label Location...........................................2-3 OPERATIONS Technical Specifications...................................
HOW TO USE THIS MANUAL The SAFETY section contains important information regarding hazard or unsafe practices of the machine. Levels of hazards are identified that could result in product or personal injury, or severe injury resulting in death. This manual contains the following sections: - HOW TO USE THIS MANUAL SAFETY OPERATIONS MAINTENANCE PARTS LIST The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.
IMPORTANT SAFETY INSTRUCTIONS When using a battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments.
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
SAFETY LABEL LOCATION NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. FLAMMABLE MATERIALS CAN CAUSE EXPLOSION OR FIRE. DO NOT USE OR PICK UP FLAMMABLE MATERIAL. SAFETY LABEL 86252540 PRV NO. 81505 BATTERY CAUTION 86252520 PRV NO.
TECHNICAL SPECIFICATIONS ITEM DIMENSION/CAPACITY Rated Voltage Rated Amperage Batteries Scrub Brush Motor Vacuum Motor Mass (GVW) Weight empty without batteries Solution Control Solution tank capacity Recovery tank capacity Scrub brush diameter Scrub brush pressure Scrub brush speed Wheels 24 VDC 30 Amps 2 x 12 Volt 105-130 AH 0.75hp (0.56 kw) 24 VDC 2 stage by pass 319 lbs (144.7 kg) 142 lbs (64.4 kg) Gravity feed, fully variable 8 Gal (30.3 ℓ) 10 Gal (37.
TECHNICAL SPECIFICATIONS ITEM Height Length Width without squeegee Width of squeegee Width of scrub path MEASURE 35 in (0.89 m) 42 in (1.07 m) 20 in (0.51 m) 31 in (0.79 m) 17 in (0.43 m) Length Width Height SPECIAL NOTES: The A-weighted sound pressure level emitted by the appliance was measured to be 74.1 dBA. This is a space-averaged, broad-band measurement determined according to IEC 704-I. This appliance contains no possible source of impact noise.
HOW THIS MACHINE WORKS This Automatic Scrubber is a battery powered, hard floor scrubber intended for commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with a brush, and then vacuums the soiled water back into the recovery tank. The machine's primary systems are the solution system, scrub system and recovery system. The function of the solution system is to store cleaning solution and deliver it to the scrub system.
COMPONENTS 5 1 3 2 4 9 13 12 10 7 11 8 6 1. 2. 3. 4. 5. 6. 7. 8. Control Panel Control Handle Recovery Tank Recovery Tank Drain Hose Recovery Tank Domel Scrub Brush/Pad Solution Tank Solution Tank Cover 9. 10. 11. 12. 13. 14.
CONTROLS 5 1 6 4 2 9 8 7 3 1. 2. 3. 4. 5. 3-5 Solution Control Lever Brush Switch Brush Lift Pedal Vacuum Switch Squeegee Lift Lever 6. 7. 8. 9.
CONTROLS 1. SOLUTION CONTROL LEVER Controls solution flow to scrub deck. To increase flow push the knob forward to the desired flow. To decrease flow pull the knob back. 2. BRUSH SWITCH Controls the scrub brush motor. To turn scrub brush on, press the top of the switch. To turn scrub brush off, press the bottom of the switch. 3. BRUSH LIFT PEDAL Raises and lowers the brush. To lower the brush, push down on pedal and move to the left. To raise the brush, lift the lever from its lowered position. 4.
MACHINE OPERATIONS PRE-RUN MACHINE INSPECTION Do a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Follow the same procedure each time to avoid missing steps. NOTE: See maintenance section for pre-run machine inspection checklist items. FILLING SOLUTION TANK FOR SAFETY: Before leaving or servicing machine; stop on level surface, turn off machine. NORMAL SCRUBBING Plan the scrubbing pattern in advance.
MACHINE OPERATION TO BEGIN SCRUBBING When operating the machine around people, pay close attention for unexpected movement. Use extra caution around children. The length of time between the first and second pass depends on the amount of accumulation and the type of chemical being used. A second scrubbing with the squeegee down, vacuum on and again with solution and brush on will further loosen the soil. The additional application of solution will further assist the difficult cleaning job.
MAINTENANCE BATTERIES (WET CELL BATTERIES ONLY) The batteries provide the power to operate the machine. The batteries require regular maintenance to keep them operating at peak efficiency. When servicing machine, avoid contact with battery acid. The machine batteries will hold their charge for long periods of time, but they can only be charged a certain number of times. To get the greatest life from the batteries, charge them when their charge level reaches 25% of a full charge.
MAINTENANCE CHECKING BATTERY SPECIFIC GRAVITY Use a hydrometer to check the battery specific gravity. TO CHARGE THE BATTERIES When servicing machine, avoid contact with battery acid. Batteries emit hydrogen gas. Explosion or fire can result. Keep sparks and open flame away. Keep covers open when charging. Battery Check Wear eye protection and protective clothing when working with batteries. Charge batteries in a well ventilated area. Leave the solution tank open. CHECKING GRAVITY A. Hydrometer B.
MAINTENANCE-From Serial Number ** ON-BOARD CHARGER BATTERY SELECTION ! WARNING Disconnect charger from wall outlet before changing charge profiles. Failing to do so could result in electrical shock. Only dipswitch SW1 effects the charging curve. Select the appropriate dip switch setting from the Charging Curve Table. Do not change settings of SW2. Changing settings of SW2 dipswitch could result in charger failure.
MAINTENANCE MACHINES WITHOUT ONBOARD CHARGER CHANGING BATTERIES Use a 24 volt, 12 amp maximum output, DC charger which will automatically shut off when the batteries are fully charged to charge the two battery pack. Stop the machine in a clean area next to the charger. Turn off machine. 1. Stop the machine in a clean, well ventilated area next to the charger. 2. Turn the machine off. FOR SAFETY: Before leaving or servicing the machine; stop on level surface, turn off machine. 1.
MAINTENANCE SCRUB BRUSHES FINISHED FLOORS NOTE: All original equipment brushes are equipped with “Perform Alert©”. This feature will tell the operator when it is time to replace the scrub brush. “Perform Alert©” brushes have pre-trimmed bright yellow tufts to indicate the length of a worn out brush. When the tufts in the scrub brush wear to a length equal to the yellow tufts, the scrub brush should be replaced. Nylon bristles are used in a variety of applications on coated or uncoated surfaces.
MAINTENANCE REPLACING OR REMOVING SCRUB BRUSHES SQUEEGEE BLADES 1. Turn the machine off. The front squeegee blade allows solution to pass through channels in the blade into the squeegee assembly while maintaining vacuum to provide lift. FOR SAFETY: Before leaving or servicing the machine; stop on level surface, turn OFF machine. 2. Raise the scrub deck up by pushing down on the The rear blade wipes the floor to a near dry condition.
MAINTENANCE SERVICE SCHEDULE MAINTENANCE Check battery acid level Check vac hose connections Clean the squeegee blades Inspect brush or pad for debris: wire string, wear Inspect float ball screen Before starting the work period End of work period before storing DAILY * * * * * Raise squeegee assembly Raise scrub deck assembly Charge the batteries.
TROUBLESHOOTING PROBLEM Poor or no water pick-up CAUSE Debris caught on squeegee SOLUTION Remove debris Worn squeegee blades Replace squeegee blades Vacuum hose clogged Clear obstruction from hose Vacuum hose disconnected from squeegee or recovery tank Vacuum hose damaged Reconnect vacuum hose Vacuum motor inlet screen dirty Recovery tank not sealed Recovery tank full Circuit breaker tripped Reset circuit breaker Loose connection Check motor wires and connections Replace contactor Faulty vacuu
TROUBLESHOOTING PROBLEM Little or no solution flow to the floor No power to machine Little or no propel CAUSE Solution tank empty SOLUTION Fill solution tank Solution flow turned off or set too low Solution strainer plugged Turn on or increase flow setting Clean solution strainer Solution hoses obstructed Clear obstruction from hose Solution solenoid valve obstructed or stuck Battery disconnected Clean or replace Emergency shut-off activated Check all battery cable connections Reset Battery con
17” SCRUBBER PARTS LIST 86221970 17” SCRUBBER 01/03/07
DECAL 1A 1B 3A 3B 2A 2B 5 4 5-1 86221970 17” SCRUBBER 04/17/09
DECAL REF PART NO. PRV NO. QTY DESCRIPTION 1A 86243040 500301 1 LABEL, MAIN (RIGHT) 1B 86244000 500789 1 LABEL, MAIN (RIGHT) 2A 86243050 500302 1 LABEL, MAIN (LEFT) 2B 86244010 500790 1 LABEL, MAIN (LEFT) 3A 86004970 50990 1 LABEL, LOGO DOMED 3B 4 5 86244020 86220670 86220660 500794 501027 501026 1 1 1 LABEL, LOGO DOMED LABEL, CIRCUIT BREAKER LABEL, PANEL 17 IN SERIAL NO.
CONTROL PANEL- W/CHARGER 5-3 86221970 17” SCRUBBER 01/03/07
CONTROL PANEL – W/CHARGER REF PART NO. PRV NO.
CONTROL PANEL- SCHC172 W/CHARGER 1 2 22 3 21 4 20 11 17 19 18 18 4 5 4 4 16 6 12 7 23 13 12 15 5-5 8 11 17 10 17 9 86221970 17” SCRUBBER 01/03/07 14
CONTROL PANEL SCHC172 W/CHARGER REF PART NO. PRV NO.
CONTROL PANEL – QSC172 1 2 5 3 20 4 19 18 4 4 18 14 16 6 12 7 8 13 12 9 15 5-7 17 11 17 10 86221970 17” SCRUBBER 04/17/09 14
CONTROL PANEL-QSC172 REF PART NO. PRV NO.
HOUR METER 2 1 5 4 3 5-9 86221970 17” SCRUBBER 04/17/09
HOUR METER REF PART NO. PRV NO. QTY 1 2 3 4 5 86267420 86260500 86005530 86261240 86261340 880283 880349 54154 29243 67457 1 1 1 1 1 DESCRIPTION WIRE, 3.5 BLK/18 79011 X 76040 WIRE ASM, HOUR METER METER, 12-48 VDC LED HOUR DIODE ASM, 76031 X 76031 RESISTOR ASM, 2.7K OHM 1 WATT 86221970 17” SCRUBBER 04/17/09 SERIAL NO.
HANDLE 4 3 5 2 1 6 7 5-11 86221970 17” SCRUBBER 08/20/09
HANDLE REF PART NO. PRV NO. QTY DESCRIPTION 1 86218620 38349 1 HANDLE, 17 IN SCRUBBER 2 86004880 48079 2 KNOB, 2.25 OD X 5/16-18 X 2.19 STUD 3 4 5 6 7 86221880 86221890 86069430 86216530 86277230 51416 51417 140439 270143 70815 2 2 2 2 2 LOCK, HANDLE, MALE LOCK, HANDLE, FEMALE BRKT, HANDLE MOUNT SUPPORT CAP, HANDLE SCR, 5/16-18 X 2.25 BSHCS SS 86221970 17” SCRUBBER 04/17/09 SERIAL NO.
RECOVERY TANK 1 2 13 3 16 12 18 14 10 4 17 5A 5B 11 19 20 10 10 10 15 9 8 7 6 SCHC172 5-13 86221970 17” SCRUBBER 07/27/09
RECOVERY TANK REF PART NO. PRV NO.
SCRUB BRUSH/PAD DRIVER 5-15 86221970 17” SCRUBBER 04/17/09
SCRUB BRUSH/PAD DRIVER REF PART NO. PRV NO. QTY 1 2 3 4A 4B 4C 4D 5 6 86000680 86005070 86276580 86000650 86000660 86000670 86000700 86340340 86004990 02464 51284 70694 02461 02462 02463 02509 51076 1 1 3 3 3 DESCRIPTION SERIAL NO.
SCRUB MOTOR/LIFT 2A 1 3A 3B 32 5 2B SCHC172 31 7 6 30 7 8 9 10 11 12 29 13 18 14 15 33 16 28 7 11 25 27 17 34 19 23 24 26 20 21 22 12 5-17 86221970 17” SCRUBBER 07/17/09
SCRUB MOTOR/LIFT REF PART NO. PRV NO. QTY DESCRIPTION 1 86005320 53630 1 MOTOR ASM, 24VDC 200 RPM GEAR 2A 86010610 84203 1 VALVE, 24VDC SOL 3/8 HOSE CIM 2B 86010540 84141 1 VALVE, 24VDC SOL 1/2 HOSEBARB 3A 86282080 39567 1 HOSE 3/8 NYLOBRD X 3.
SOLUTION TANK 4 3 2 1 7 6 5 35 33 34 30 8 31 28 27 16 26 13 29 9 32A 32B 25 10 22 24 11 10 23 21 19A 20 19B 12 14 17 18A 18B 5-19 86221970 17” SCRUBBER 08/20/09 13 16 15
SOLUTION TANK DESCRIPTION SERIAL NO. FROM REF PART NO. PRV NO.
SQUEEGEE 30 29 2 26 21 25 20 6 3 24 14 21 4 23 5 22 7 9 10 11 12 10 1 27 13 28 14 17 15 16 18A 18B 19 5-21 86221970 17” SCRUBBER 09/17/10 8A 8B 8C 8D
SQUEEGEE REF 1 2 3 4 5 6 7 8A 8B 8C 8D 9 10 11 12 13 14 15 16 17 18A 18B 19 20 21 22 23 24 25 26 27 28 29 30 PART NO. 86223740 86225450 86332620 86219690 86215800 86219730 86224950 86215360 86007370 86007260 86007610 86224240 86225790 86011020 86001350 86334640 86222300 86332670 86223750 86223760 86215350 86007360 86087870 86010880 86225780 86008660 86279650 86215810 86222590 86222290 86332630 86332650 86276610 86224870 DESCRIPTION PRV NO. QTY 70872 2 SCR, 1/4-20 X .59 PPHMS SS C 78936 1 TUBE, 17 IN.
SQUEEGEE LIFT 5-23 86221970 17” SCRUBBER 04/17/09
SQUEEGEE LIFT REF PART NO. PRV NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 86005680 86270830 86249050 86008670 86007020 86228840 86259400 86006320 86259410 86239670 86003220 86246460 86005640 86136860 57047 57023 82058 80606 70673 09124 87205 66338 87206 41386 27921 51351 57030 70356 1 2 1 1 2 2 2 1 2 1 1 1 1 1 DESCRIPTION NUT, 1/4-20 HEX NYLOCK NUT, 5/16-18 HEX NYLOCK SS PIN, CLEVIS 3/8 X 3.50 PLTD COTTER, 3/8” RING SCR, 5/16-18 X 1.25 HHCS SS BEARING, FLANGED .314 ID X .502 OD WASHER, THRUST .
VACUUM 5-25 86221970 17” SCRUBBER 04/17/09
VACUUM REF PART NO. PRV NO. QTY 1 2A 2B 3 4 5 6 7 8 9 86003760 86005440 86135310 86217750 86072620 86216000 86222220 86215370 86273750 86010630 35166 53797 140686 31374 14433 149988 54204 140896 70011 87013 1 1 1 3 1 1 1 3 3 DESCRIPTION GASKET, VAC MTR VAC MOTOR, 24VDC 2ST TD BRUSH SET, 24/36V VAC, WINDSOR ELBOW, VAC MUFFLER 90 DEG BRKT, VAC MOTOR MNT BRKT, MUFFLER 172 MUFFLER, VACUUM FOAM 172 BLANKET, SOUND REDUCTION SCR, 1/4-20 X 5/8 HHCS SS NP WASHER, 1/4 ID X 5/8 OD SS SERIAL NO.
WHEEL & FRAME 5-27 86221970 17” SCRUBBER 04/17/09
WHEEL & FRAME REF PART NO. PRV NO.
ONBOARD CHARGER 5-29 86221970 17” SCRUBBER 10/12/09
ONBOARD CHARGER REF PART NO. PRV NO. QTY 1 2 3 4 5 86216670 86215790 86215780 86218060 86220720 270051 140880 140879 35357 501033 1 1 1 2 1 CHARGER, CURTIS 1608, 17 INCH BRKT, 17 IN CHARGER BRKT, TOP 17 IN CHARGER GASKET, 4.25 L X .55 W X .
WIRING–BATTERY CABLES 5-31 86221970 17” SCRUBBER 04/17/09
WIRING-BATTERY CABLES REF PART NO. PRV NO. QTY 1 2 3 4 86260470 86225330 86002540 86002510 880268 78942 23174 23125 1 1 1 1 DESCRIPTION WIRE ASM, 26.5 6G RNG X C TERM TRAY, BATTERY INJ MOLDED BATTERY CBL ASM, 2 X 21 W/ANDRSN WIRE, 4 X 15 B CLAMP X B CLAMP 86221970 17” SCRUBBER 04/17/09 SERIAL NO.
WIRING-MAIN HARNESS- ALL EXCEPT QSC172, & SCHC172 2 BLK BRUSH MOTOR 1 RED SOLENOID VALVE 8 20 RED 7 21 BLK 10 4 BLK 5 VAC MOTOR 3 RED 6 7 9 11 VAC BRUSH 12 3 RED SWITCH SWITCH 3 1 4 6 BATTERY METER BLK 10 BLK 11 RED 17 RED 2 POSITIVE TERMINAL 3 4 BLK 21 BLK 2 BLK BLK 30 1 RED 20 RED 25A BRUSH MOTOR 86 NEGATIVE TERMINAL 87A CHARGING INHIBIT RELAY 25A 4 2 BLK 85 BRUSH REVERSE RED HOUR METER 1 VAC MOTOR 2 3 6 RED 5 RED POSITIVE BATTERY CABLE NEGATIVE BATTERY
WIRING-MAIN HARNESS-ALL EXCEPT QSC172, & SCHC172 REF PART NO. PRV NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 86218890 86261230 86261240 86261340 86268570 86267420 86267410 86267620 86268380 86226170 86226190 86268030 86226210 880448 29242 29243 67457 88401 880283 880282 880306 88286 880447 880450 880456 880457 1 1 1 1 1 2 2 1 1 1 1 1 1 DESCRIPTION HARNESS, SCRUBBER 172 DIODE ASM, 76031 X 76042 DIODE ASM, 76031 X 76031 RESISTOR ASM, 2.7K OHM 1 WATT WIRE, 3” BLK/14 76029 X 76029 WIRE, 3.
WIRING-MAIN HARNESS-SCHC172 7 5 11 7 6 9 8 12 13 6 13 15 3 10 4 2 1 14 5-35 86221970 17” SCRUBBER 10/12/09
WIRING-MAIN HARNESS-SCHC172 REF PART NO. PRV NO. QTY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 86218890 86261230 86261240 86261340 86268570 86267420 86267410 86267620 86268380 86267360 86226170 86226190 86268030 86226210 86014120 880448 29242 29243 67457 88401 880283 880282 880306 88286 880271 880447 880450 880456 880457 - 1 1 1 1 1 2 2 1 1 1 1 1 2 1 1 DESCRIPTION HARNESS, SCRUBBER 172 DIODE ASM, 76031 X 76042 DIODE ASM, 76031 X 76031 RESISTOR ASM, 2.7K OHM 1 WATT WIRE, 3” BLK/14 76029 X 76029 WIRE, 3.
WIRING-MAIN HARNESS-QSC172 5-37 86221970 17” SCRUBBER 04/17/09
WIRING–MAIN HARNESS QSC172 REF PART NO. PRV NO. QTY 1 2 3 4 5 6 7 8 9 10 11 86218890 86261230 86261240 86261340 86268570 86267420 86267410 86267620 86268380 86226170 86267430 880448 29242 29243 67457 88401 880283 880282 880306 88286 880447 880284 1 1 1 1 1 2 2 1 1 1 2 DESCRIPTION HARNESS, SCRUBBER 172 DIODE ASM, 76031 X 76042 DIODE ASM, 76031 X 76031 RESISTOR ASM, 2.7K OHM 1 WATT WIRE, 3” BLK/14 76029 X 76029 WIRE, 3.5 BLK/18 76011 X 76040 WIRE, 6” RED/14 76010 X 76029 WIRE, 5.
5-39 86 30 87A 85 POSITIVE WIRE 4 BLACK FROM CHARGER 86221970 17” SCRUBBER 10/12/09 86267620 - PRV NO. 880306 WIRE 11 86267620 PRV NO. 880306 86267420 - PRV NO. 880283 WIRE 21 WIRE 10 BRUSH 86261230 PRV NO. 29242 TERMINAL BATTERY CHARGER WIRE 21 WIRE 20 WIRE 1 WIRE 2 BRUSH MOTOR 86267420 PRV NO. 880283 HOUR METER 1 2 3 86261340 PRV NO. 67457 WIRE 10 WIRE 1 WIRE 2 86268570 PRV NO. 88401 WIRE 5 86267410 PRV NO. 880282 86268380 PRV NO. 88286 86268570 - PRV NO.
85 RELAY 86 30 87A 85 BLACK FROM CHARGER 87A 86226210 - PRV NO. 880457 86 RED FROM CHARGER 30 86226190 - PRV NO. 880450 86014120 86268030 PRV NO. 880456 86267360 - PRV NO. 880271 POSITIVE TERMINAL 86221970 17” SCRUBBER 10/12/09 WIRE 10 86261230 PRV NO. 29242 WIRE 1 WIRE 2 WIRE 21 WIRE 20 WIRE 1 WIRE 2 WIRE 4 BRUSH MOTOR 86267420 PRV NO. 880283 HOUR METER 86261340 PRV NO. 67457 WIRE 11 86267620 PRV NO. 880306 86267420 - PRV NO. 880283 WIRE 21 WIRE 10 BRUSH 86267620 PRV NO.
5-41 POSITIVE TERMINAL 86260470 - PRV NO. 880268 BATTERY POWER 86221970 17” SCRUBBER 04/17/09 86267620 - PRV NO. 880306 WIRE 11 86267620 PRV NO. 880306 86267420 - PRV NO. 880283 WIRE 21 BRUSH WIRE 10 86267620 PRV NO. 880306 86261230 PRV NO. 29242 WIRE 1 WIRE 21 WIRE 20 WIRE 1 WIRE 2 BRUSH MOTOR 86267420 PRV NO. 880283 HOUR METER 86261340 PRV NO. 67457 WIRE 10 86268570 PRV NO. 88401 WIRE 2 86267420 PRV NO. 880283 WIRE 4 BRUSH REVERSE 86268380 PRV NO.
SUGGESTED SPARE PARTS PART NO. PRV NO. DESCRIPTION 86215680 86135310 86001360 86002510 86002540 86003630 86003760 86003980 86219690 86242100 86007320 86224610 86007350 86007360 86007610 86252520 86252540 140931 140686 140394 23125 23174 34351 35166 35249 48080 48083 730029 730359 730040 730057 730227 80885 81505 BREAKER, 25A 250VAC 50VDC BRUSH SET, 24/36V VAC, WINDSOR BRUSH SET, CCL MOTORS WIRE 4 X 15 BCLAMP X BCLAMP WIRE ASM 2X21 BATTERY W/ ANDERSON FLOAT SHUT-OFF GASKET, VAC MTR GASKET, SQG. .
NOTES REF. NO. 1 5-43 MODEL: SERIAL #: 1.006-627.0: 10066270000010, 1.006-630.0: 10066300000085, 1.006-631.0: 10066310000054, 1.006632.0: 10066320001169, 1.006-633.
