Use and Care Manual

14
Get to know your AC.
Display & operating overview
Fan mode
Use this mode to run the fan only. The compressor
will not turn on. You can choose high, medium, or
low fan speed. Auto fan does not work in this mode.
The display will show the room temperature, and you
cannot adjust the set temperature in this mode.
Wi indicator light
To connect your unit to the Windmill app, hold down
the wi button for 5 seconds. It will continue to ash
for 60 seconds. If it does not pair, it will stop ashing
after 60 seconds. If it does pair, the wi indicator
light will stay lit.
Note: this wi indicator light will ash for 60 seconds when initially
plugged in - it will stop after 60 seconds if you do not wish to pair
with the app.
Degree symbol & clean lter indicator
The degree symbol will change from white to orange
after 250 hours of operation. This means it is time
to clean or change your lter. Once you clean or
change your lter, hold down the lter button for 5
seconds until it beeps and the degree symbol turns
from orange back to white.
4 5
6
Other important operating notes:
● There is a 3 minute delayed start if the AC is turned on and off
quickly in cool or eco mode. This helps protect the compressor
from overheating or the circuit breaker from tripping. The fan
will still run during this delay.
● When you select fan mode, the compressor will continue to run
for approximately 2 minutes (in case you decide to cycle back
through to cool or eco mode).
● When the unit is turned off in cool or eco mode, it will always
return to eco mode when powered back on.
● If power is lost due to a power outage, the AC will restart in
whatever mode it was last in before shutting off.
● The temperature can be set between 60 degrees Fahrenheit and
80 degrees Fahrenheit. The AC will maintain your desired set
temperature within approximately 2 degrees Fahrenheit in a well
insulated room 375 square feet or smaller.
4
6
5