User's Manual

Confidential Page 6 5/8/2003
2210 O’Toole Ave. #200, San Jose, Ca. 95131
Tel: [phone] Fax: [phone]
Headset is in talking (SCO connected) mode
5. Summary of button operation
Short press talk button (hold time less than 1 seconds)
 When headset is in standby mode, this will put headset into master mode
 When headset is in master mode, this will put headset into idle mode
 When headset is in talking mode, this will put headset into standby mode
Short press volume button (hold time less than 1 seconds)
 When headset is not in talking mode, this takes no effect.
 When headset is in talking mode, this will adjust headset volume
Press and hold talk buttons for 3 seconds
 When headset is in idle mode, this will put headset into standby mode, in
other words, this will turn on headset
 When headset is not in idle mode, this will turn off headset
Press and hold volume button for 3 seconds
 When headset is not talking mode, this takes no effect on headset’s status
 When headset is in talking module, this will toggle microphone mute and
un-mute.
Press and hold talk buttons for 5 seconds
 When headset is in idle mode, this will put headset into pairing mode.
 When headset is not in idle mode, this takes no effect on headset status.
6. Summary of status transition
Both amber and blue LEDs are turned off
Amber LED and blue LED flash alternatively
Blue LED is turned off, and amber LED flashes
Blue LED flashes, and amber LED is turned off
Normally the headset will stay in standby mode unless user initializes shutdown
operation.