Specifications

34
5s
RESET
5s
RESET
5s
RESET
5s
RESET
5s
RESET
34
Operation
2.10.1.5 Probe switching
1)
If the VarioWIN is equipped with a pneumatic feed (suction system)
with 2 or 3 probes, it is possible to set here which probe is used
for sucking pellets from the pellet storage room. There are four dif-
ferent setting options:
– Automatic: Removal from all 3 probes, automatic switching.
– Only probe 1:Removal from probe 1 only, no switching
– Only probe 2:Removal from probe 2 only, no switching
– Only probe 3:Removal from probe 3 only, no switching
Note: If „Pellet feed system, operation with 2 probes“ is set in the
„Service level“, the option of „Only probe 3“ is not displayed here.
Fig. 95
Fig. 96
Fig. 97
Fig. 98
Pressing one of the six buttons switches the lighting and display
on – Fig. 95.
Press the
Menu button – Fig. 96.
Confirm the selected menu item „Operator level“ by pressing the
Choose button – Fig. 97.
Use the arrow buttons to select the „Probe switching“ sub-menu
item – Fig. 98.
Confirm the selected sub-menu item „Probe switching“ by pressing
the
Choose button – Fig. 99.
Fig. 99
Boiler temperature
(Operating phases)
Lighting ON
42
°C
Boiler temperature
(Operating phases)
Info Menu
42
°C
Operator level
Service level
Choose Back
Boiler cleaning
Time
Feed operating mode
Feed tiame profile
Probe switching
Time profile ash comp.
Choose Back
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash comp.
Choose Back
1)
Only displayed with a VarioWIN - VAE 120 P with pneumatic feed (suction
system) when the unit has been adjusted by a trained service technician in
the service level.