Specifications

78
in.xe™
Place a rubber 2" O'ring gasket
at the end of each heater nut, to
prevent water leakage between
the heater nuts and the 2” PVC
heater tailpieces.
When installing the new in.xe™
spa pack, slide back side of the
unit's feet into the guide plate.
Install the new in.xe™ spa pack
in the spa plumbing.
Secure the keypad in place.
Insure that its adhesive strip
is properly glued by pressing
evenly with your finger over the
entire surface.
step by step field replacement procedure