Specifications

16
in.xe™
In.xe.ce™ 230 VAC or
230/400 VAC
Correct wiring of the electrical
service box, RCD, and pack
terminal block is essential!
Call an electrician if necessary.
Warning!
In.xe.ce™ models must always
be connected to a circuit
protected by a Residual-
Current Device (RCD) having
a rated operating residual-
current not exceeding 30 mA.
Electrical wiring European model in.xe.ce™
Single-phase Dual-phase
electrical wiring
For 120 VAC (*3 wires)
*If connected to a 3 wire
system, no 240 VAC
component will work.
Refer to "Connections
for 120v heater" section
of this manual.
For 240 VAC (4 wires)
Correct wiring of the electrical
service box, GFCI, and pack
terminal block is essential.
Call an electrician if necessary.
Electrical wiring North American model in.xe™