User guide

Test the prin ter

The test prints a list of various printer settings (Diagnostic form) and partially

cuts the paper if a knife is installed (see sample on next page). The test

printout items may vary depending on the printer model. This printout may

be useful to a service representative if there is a problem. If something

appears to be wrong with the test printout (such as missing or faded text),

see the section "Troubleshooting" in this document.

At the end of the test printout are instructions how to enter the configuration

menu.

The configuration menu allows you to change the current settings of the

printer.

To run the test, either:

Open (1) then while holding down the paper feed button, close the receipt

cover (2).

Open receipt cover.

Push and hold paper feed button

while closing receipt cover.

Press the paper feed button and the reset button at the same time. The

Diagnostic printout will print.

CON NECT THE CA BLES