Specifications

The on-line, paper
status, error light is
blinking and the
printer won’t print.
Thermal print head
temperature is out of
range.
The print head may overheat when
printing in a room where the temperature
is above the recommended operating
temperature or when printing high
density graphics continuously, regardless
of the room temperature. In either
case,the printer will shut off. If the
temperature of the print head is too hot,
adjust the room temperature or move the
printer to a cooler location. If the print
head is overheating because of printing
high density graphics continuously,
reduce the demand on the printer.
AC supply voltage is out
of range.
If paper is not low and no conditions
indicate that the thermal print head is too
hot, the power supply voltage is out of
range. Contact a service representative.
Slip-in light does not ope ra te
Condition Possible causes What to do
Light does not operate No check or form inserted
into printer.
Check or form incorrectly
inserted.
Ensure the check or form
is aligned properly.
See “Printing on forms or
checks.”
Check print qua li ty poor
Condition Possible causes What to do
Printer starts to print, but stops
while form is being printed.
Communication error or
software error.
Check the interface
cable. Check that the
software is working
properly.
STATUS INDICATORS
46