Specifications

Verifying and validating checks (optional)
The printer’s MICR check reader enables check verification and
validation by inserting the check from either the front or the top of the
printer.
To ensure that checks are properly verified and validated, they must be free
of folds and wrinkles and inserted correctly into the MICR printer. Smooth a
wrinkled or folded check for best performance.
To verify and validate a check inserted from the front:
n
Place the check face down on the slip table, with the bottom edge of the
check to the right. Move the check to the right so it aligns along the check
guide.
n
Slide the check straight forward into the printer until the green slip-in light
on the top right edge of the printer comes on, indicating both sensors are
covered.
39
VERIFYING AND VALIDATING CHECKS (OPTIONAL)
Check orien ta ti on - face down
Do not fold check
Front
co ver
Slip
table