Specifications

Using the Printer
Printing on forms or checks
Several types of transactions may require the insertion of a check or other
form into the printer:
n
Credit card transaction (requiring a merchant ve ri fi ca ti on or aut ho ri za ti on
slip)
n
Multiple-part forms such as credit transactions or merchandise returns
n
Electronic funds transfers
n
Electronic check
n
Check printing (printing the date, payee, and amount on the check face)
n
Check endorsement
The TH320 can also print on multi-part forms up to four parts thick. Use
either the front insertion or drop in method, described below.
Front in ser ti on me thod
n
Insert the form or check (as shown on the left above) from the front and
place it on the slip table with the print side up. If the form is extra long,
you may need to insert it from the side. A slight resistance may be felt
when the form comes in contact with the form stop.
n
Slide the form or check to the right until it aligns against the check guide.
n
Slide the form or check toward the top of the printer until the green slip-in
light on the top cover turns on. This indicates that both sensors are
covered.
PRINTING ON FORMS OR CHECKS
36
Check
orientation
Front
co ver
Slip
table
Front
co ver
Slip
table