Specifications

Set ting the prin ter emu la tions and soft wa re op tions
Printer emulations determine what commands are available to the printer.
To change the printer emulations settings, select the “Emulations/Software
Options” sub-menu of the main menu and answer “Yes” to “Set the Printer
Emulations?” printed on the receipt. This takes you to the instructions for
setting the printer emulation.
Be extremely careful changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of
the printer.
Press the paper feed button for at least one second to validate the selection.
n
Printer Emulation
Native mode
A756 Emulation
n
Printer ID mode
This function determines the ID value returned by the printer in response
to a Transmit printer ID command (1D 49 n). The printer can be
configured to send back the ID of the TH320, TH420, A758 or A756.
n
Carriage return usage
This function allows the printer to use the carriage return (hexadecimal
0D) command as a print command or to ignore it, depending on the
application.
Press the paper feed button as instructed to select the printer emulation you
want.
Slip Op tions
n
Slip eject at receipt select
When en ab led the prin ter ejects the slip when re ceipt is se lec ted.
n
Delete Lead Spaces: N Standard Columns
Sets the TH320 to de le te num ber (N) of lea ding
spa ces in the slip for mat for stan dard print.
n
Delete Lead Spaces: N Compressed Columns
Sets the TH320 to de le te num ber (N) of lea ding
spa ces in the slip for mat for com pres sed print.
n
Compressed Mode: Disabled/Enabled
Turns on com pres sed print for all slip prin ting
33
DIAGNOSTIC MODES