Specifications

Press the paper feed button as instructed to select the communication
interface you want.
n
Communication interface
RS-232C interface
USB (USB or Powered USB)
RS-232C se ri al in ter fa ce set tings
To change the RS-232C serial interface settings, enter the configuration
menu, select “Set Communication Interface” from the main menu and
answer “No” to “SET INTERFACE TYPE?” printed on the receipt. This takes
you to the instructions for selecting the RS-232C settings.
Be extremely careful changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of
the printer.
Press the paper feed button as instructed on the configuration menu to
select the RS-232C settings you want to change:
n
Baud rate
115200 baud
57600 baud
38400 baud
19200 baud
9600 baud
4800 baud
2400 baud
1200 baud
n
Number of data bits can not be changed
n
Stop bits can not be changed
n
Parity can not be changed
n
Hardware flow control
Software (XON/XOFF)
Hardware (DTR/DSR)
n
Data reception errors
Ignore errors
Print “?”
29
CONFIGURING THE PRINTER