Specifications

n
Plug the power cord into the power supply, then plug the power supply
into an outlet. The green light on the top cover will light up.
Ca ble rou ting
Prevent the printer from being accidentally unplugged by making sure the
cables are routed as shown in the illustration below.
Testing the printer
This test prints a complete list of printer settings (Diagnostic form) and
partially cuts the paper (see sample on next page). The test items listed
may vary depending on the printer model. This printout is useful to a service
representative when there is a problem. If the quality of the test printout is
poor (missing or faded text) see the Troubleshooting section in this
document.
Instructions at the end of the test printout describe how to enter the
configuration menu. The configuration menu allows you to change the
current settings of the printer.
TESTING THE PRINTER
22
Con nec tor
Co ver
(Clo sed)
Com mu ni ca ti on
Con nec tor
(RS-232C)
(Rou te straight
out back of prin ter
and tighten
screws)
Po wer
Supp ly
Ca ble
(Straight
back)
Po wer Supp ly
Strain Relief
USB Ca ble
Strain Relief
USB
Cable
Cash Dra wer Ca ble
USB Ca ble
Po wer Supp ly
Strain Relief
USB Ca ble
Strain Relief