Specifications

Installing new receipt paper
If the online paper status error light blinks, Change the paper as soon
as convenient to avoid running out of paper part way through a
transaction.
If the On-line, Paper Status, Error light blinks fast, the paper is out. Change
the paper immediately or data may be lost. The printer can accept and store
only a limited amount of data without paper. Memory overload can occur in
the buffer, leading to a total loss of data.
If you are changing the type of paper (monochrome vs. two-color version or
manufacturer type) send the “Set paper type” (1D 81 m n) command
(description found in the "Programming Guide"). Refer to the “Set paper
type” selection in the configuration menu. See the section on
"Configuring the printer".
n
Open the receipt cover and remove the used roll and core (if present).
n
Tear off the end of the new roll so that the edge is loose.
n
Place the roll into the paper bucket with the paper unrolling from the
bottom of the roll, and with a few inches of paper extending over the
cabinet front.
Paper must unroll from the bottom of the roll to insure that the image
prints.
15
INSTALLING NEW RECEIPT PAPER