Specifications

Au di ble Beeps
After power is applied or after reset, the printer normally emits a single
beep. This indicates that the printer has successfully completed its
startup and self-test routine.
If, after startup or reset, the beeping continues in a single, double, or triple
pattern, an internal failure has occurred. Please call your service
representative.
Available printer configurations
There are several configurations of the printer, depending on the
combination of desired options.
Prin ter con fi gu ra ti on iden ti fi ca ti on
See the sample below to determine the printer configuration. The printer
configuration identification (model ID) is located on the model label attached
to the back of the printer. This information is also shown on the installation
quality report card. The model ID description is shown below.
Com mu ni ca ti on in ter fa ces
n
RS-232C serial interface (25-pin)
n
Universal Serial Bus (USB)
n
Powered USB
9
AVAILABLE PRINTER CONFIGURATIONS