Specifications

Programmers Guide TH230/TH230+

FS C (Asia version)

Function:

Select Kanji character code system

Code ASCII: FS C n

Code HEX: 0x1C 0x43 n

Range:

n = 0, 1, 48, 49

Default: n = 0

Description: Selects a Kanji character code system for the Japanese model as follows:

Bit Kanji character code system

0, 48 JIS code

1, 49 SHIFT JIS code

Notes:

• If the ASIA character module is not loaded then this command is

ignored.

• The ASIA character set module can only be loaded in the Asia version of

TH230. The Controller of this version is equipped with at least 4 MByte

Flash Memory.

FS S (Asia version)

Function:

Set Kanji character spacing

Code ASCII: FS S n1 n2

Code HEX: 0x1C 0x53 n1 n2

Range:

0 ≤ n1 ≤ 255

0 ≤ n2 ≤ 255

Default: n1 = 0, n2 = 0

Description: Sets the left-side character spacing of the multi-byte code character to [n1

(horizontal or vertical motion unit)]; sets the right-side character spacing of

the multi-byte code character to [n2 (horizontal or vertical motion unit)].