Specifications

Programmers Guide TH230/TH230+

FS - (Asia version)

Function:

Turn underline mode on/off for Kanji characters

Code ASCII: FS - n

Code HEX: 0x1C 0x2D n

Range:

1 ≤ n ≤ 2, 48 ≤ n ≤ 51

Default: n = 0

Description:

Turns on or off underline mode for multi-byte code character(Kanji-

underline) as follows:

n Function

0, 48 Turns off Kanji-underline mode.

1, 49 Turns on Kanji-underline mode, set at 1-dot

width.

2, 50 Turns on Kanji-underline mode, set at 2-dot

width.

Notes:

• If the ASIA character module is not loaded then this command is

ignored.

• The ASIA character set module can only be loaded in the Asia version of

TH230. The Controller of this version is equipped with at least 4 MByte

Flash Memory.

FS . (Asia version)

Function:

Cancel Kanji character mode

Code ASCII: FS .

Code HEX: 0x1C 0x2E