Specifications

TH230/TH230+ Programmers Guide

FS ! (Asia version)

Function:

Select print mode(s) for Kanji characters

Code ASCII: FS ! n

Code HEX: 0x1C 0x21 n

Description:

Selects the character styles (double-height, double-width, and Kanji-

underlined)

together for multi-byte code character as follows:

Bit Function

Value

0 1

0 Reserved

1 Reserved

2 Double-width mode Disabled Enabled

3 Double-height mode Disabled Enabled

4 Reserved

5 Reserved

6 Reserved

7 Kanji-underline mode Disabled Enabled

Notes:

• If the ASIA character module is not loaded then this command is

ignored.

• The ASIA character set module can only be loaded in the Asia version of

TH230. The Controller of this version is equipped with at least 4 MByte

Flash Memory.

FS & (Asia version)

Function: Select Kanji character mode

Code ASCII:

FS &