Specifications

Programmers Guide TH230/TH230+

• Wincor Nixdorf specific function

TH230 + only. Firmware 01.07 or newer

• Last error mechanism works at time with following command:

GS ( k pL pH cn fn m (cn = 49, fn = 81)

Command returns the last error until a new error occurred or the error

is reset by ESC w n _ r e s e t _ sys _ e r r o r

ESC w n _ r e s e t _ sys _ e r r o r

FUNCTION:

Reset last error.

Code ASCII: ESC w n _ r e s e t _ sys _ e r r o r

NULL

Code HEX: 0x1B 0x77 0x6E 0x5F 0x72 0x65 0x72 0x65 0x74 0x5F 0x73 0x79 0x73 0x5F

0x65 0x72 0x72 0x6F 0x72 0x00

Description: This function resets the last error that has occurred.

Notes:

Wincor Nixdorf specific function.

TH230 + only. Firmware 01.07 or newer

Get the last error with ESC w n _ g e t _ l a s t _ e r r o r .

After excution this command ESC w n _ g e t _ l a s t _ e r r o r will send

“No error”