Specifications

TH230/TH230+ Programmers Guide

ESC w n 7

Function:

Receipt shooting flush

Code ASCII: ESC w n 7 n

Code HEX: 0x1B 0x77 0x6E 0x37 n

Range:

n = 0, 1, 48, 49

Description: The Receipt shooting spooler is flushed with or without printer

synchronization and the printer sends 1 byte back to the host after

execution.

• n specifies the function.

Function

0, 48 Receipt shooting flush without printer

synchronize

1, 49 Receipt shooting flush with printer

synchronize

Notes:

• The answer byte is fixed to 0x19.

• If the value of n is out of the specified range, this command is ignored.

• Receipt shooting flushing is executed only if Receipt shooting was

enabled by memory switch 128-5 (command GS ( E).

• Printing of barcode PDF417 will stopped the printout for a short time

(see GS k)

Wincor Nixdorf specific function

ESC w n 8

Function: Play melody from flash

Code ASCII:

ESC w n 8 n m

Code HEX: 0x1B 0x77 0x6E 0x38 n m

Range: 1 <= n <= 255

0 <= m <= 1

Description: The Printer play the melody from flash specified with parameter n.

If the number of melodies in the flash smaller n, the command is ignored.

Parameter m is the synchronism flag. Is m not 0, the printer waits for finish

melody.

Notes: Wincor Nixdorf specific function