Specifications

TH230/TH230+ Programmers Guide

ESC c 5

Function:

Enable/disable feed button

Code ASCII: ESC c 5 n

Code HEX: 0x1B 0x63 0x35 n

Range:

0 ≤ n ≤ 255

Default: n = 0

Description:

Enables or disables the feed button.

• When the LSB of n is 0, feed button is enabled.

• When the LSB of n is 1, feed button is disabled.

Notes:

• The function of the feed button will only be executed when the feed

button is turned on.

• Even if the feed button is disabled by this command, paper feed button

will be enabled temporarily while printer is waiting for the button to be

pressed in the following states. Whether the paper can be fed or not

depends on the state:

• When the printer is waiting for the button to be pressed while GS ^ is

executed (but paper cannot be fed)

To prevent problems caused by accidentally pressing the feed button,

use this command to disable the button.

• When the paper roll end sensor detects a paper end, the FEED is

enabled regardless of the setting of this command. Even if the switch is

pressed, paper cannot be fed.

• When the cover is open, the FEED button is disabled regardless of the

settings of this command.

• Disabling the feed button while the button is pressed will not stop the

current paper feed.