Specifications

Programmers Guide TH230/TH230+

ESC V

Function:

Turn 90° clockwise rotation mode on/off

Code ASCII: ESC V n

Code HEX: 0x1B 0x56 n

Range:

0 ≤ n ≤ 2, 48 ≤ n ≤ 50

Default: n = 0

Description:

In standard mode, turns 90° clockwise rotation mode on or off, using n as

follows:

n Function

0, 48

Turns off 90° clockwise rotation mode.

1, 49

2, 50

Turns on 90° clockwise rotation mode (1-dot character

spacing).

Notes:

• The 90° clockwise rotation mode is effective for all characters (except for

HRI characters) in standard mode.

• When underline mode is turned on, the printer does not underline 90°

clockwise-rotated characters.

• When character orientation changes in 90° clockwise rotation mode, the

relationship between vertical and horizontal directions is reversed.

• The 90° clockwise rotation mode has no effect in page mode. If this

command is processed in page mode, an internal flag is activated, and

this flag is enabled when the printer returns to standard mode.

• The settings of this command are effective until ESC @ is executed, ESC

DC2 is executed, the printer is reset, or the power is turned off.