Specifications

TH230/TH230+ Programmers Guide
45
8 dots mode (m = 0,1) 24 dots mode (m = 32, 33)
d1 d2 … dk
MSB
LSB
d1 d4 …
dk-
2
MSB
LSB
d2 d5 …
dk-
1
MSB
LSB
d3 d6 … dk
MSB
LSB
• The modes selectable by m are as follows:
“Vertical” is in the direction of paper feeding and “horizontal” is
perpendicular (at right angles) to the direction of paper feeding.
• See Functions 5 and 6 of GS ( E to specify the paper width and paper (2-
color paper/monochrome paper).
• See Functions 3 and 4 of GS ( E for the memory switch.
•
When both standard mode and page mode are selected (a starting point
specified by ESC T is upper left or lower right).
m Mode
Vertical
dot
density
Horizontal
Dot
density
Set
adjacent
dots
Maximum
number of dots
Paper
width
80 mm
Paper
width
57.5
mm
576 dot 408 dot
0
8-dot single-
density
203/3
dpi
203/2dpi
Permitted
288
204
1 8-dot
double-
density
203/3
dpi
203 dpi Permitted 576 408
32 24-dot
single-
density
203 dpi 203/2dpi Permitted 288 204
33 24-dot
double-
density
203 dpi 203 dpi Permitted 576 408
When the starting position specified by ESC T is upper right or lower left in
page mode.