Specifications

TH230/TH230+ Programmers Guide
27
4 Not used Fixed to 1
5 Customer display
Not connected
or Handshake
blocked
Connected
and
Handshake
ready
6 Undefined
7 Not used Fixed to 0
Bit 3: Busy is set when the printer enters the Offline State (see chapter
Online / Offline State Diagram) or if the receive buffer is nearly full.
n = 2 (busy status)
Bit Function
Value
0
1
0
Not used
Fixed to 0
1 Not used Fixed to 1
2 Cover Closed Open
3
Paper feeding with paper
feed button
Not during
paper feed
During paper
feed
4 Not used Fixed to 1
5
Printing stop due to a
paper end
No paper end
stop
Printing stops
6
Recoverable Error
No error
Error occured
7 Not used Fixed to 0
Bit 5: Bit 5 becomes “1” as sensor of the roll paper detects the paper
not present made to the print stop.
Bit 6: Recoverable Error means Cover open, Paper out, Black mark
error, Cutter error.
n = 3 (error status)
Bit Function
Value
0 1
0 Not used Fixed to 0
1 Not used Fixed to 1
2
Undefined
3 Cutter error No error
Error
occurred
4
Not used
Fixed to 1
5 Undefined
6 Unrecoverable Error No error
Error
occurred
7 Not used Fixed to 0
Bit 6: Thermistor error, High voltage error or Low voltage error.
Thermistor error is an unrecoverable error. High voltage error and
Low voltage error are automatic recoverable errors!