Specifications

Programmers Guide TH230/TH230+
24
• - If the printer will print in the remaining printable area of the label, but
the feed amount exceeds the remaining printable area of the label, the
printer prints the label and feeds to bottom of the label.
Reference: ESC 2, ESC 3, ETB
FF
Function:
(1) Print and return to standard mode (in page mode)
Code ASCII:
FF
Code HEX: 0x0C
Description:
In page mode, prints the data in the print buffer collectively and returns to
standard mode.
Notes:
• This command is enabled only in page mode.
• The data is deleted in the printing area after being printed.
• This command returns the values set by ESC W to the default values.
• The value set by ESC T is maintained.
• After printing, the printing position moves to the beginning of the line.
When a left margin is set, the position of the left margin is the beginning
of the line.
FF
Function: (2) Print and feed marked paper to print starting position
Code ASCII:
FF
Code HEX: 0x0C
Description: Prints the data in the print buffer and feeds marked paper to the print
starting position.
Notes:
• If the BM sensor is enabled by using memory switch 0x80 the printer
feeds the marked paper to the next mark position.
• If the paper is at the print starting position and there is no data in the
print buffer, this command is ignored.
• If the BM sensor is enabled by using memory switch 0x80 the minimum
foot loss is > 5 mm.
• After printing, the printing position moves to the beginning of the line.
When a left margin is set, the position of the left margin is the beginning
of the line.
Reference: Memory switch (see page 98)