Specifications

TH230/230+ Programmer’s Guide
273
Sensor Test
This function shows the sensor changes. If at least one sensor status is changing, the green
and red LED toggles.
The sensor test can be stopped by pushing the linefeed button once for a long time (> 1
second). Afterwards a software reset is executed.
EEPROM default settings
Memory Switches
Black Mark Sensor Disabled
Endurance Test
Disabled
Automatic Line Feed Enabled
Power Button Enabled
Power-ON Notice
Disabled
Paper-NE Notice Enabled
Receipt Shooting Disabled
Sleep Mode
Disabled / TH230+ enabled
Code 128 Check Digit Enabled
ITF Leading Zero
Enabled
Barcode String Termination
Enabled
Legacy Printer Support Disabled
Listen To RT-Cmds
Always
Interface Power in Sleep Mode On
Also the configuration settings are set to the following values:
Customized values
Print Density 100%
Paper Width
Unchanged
Max Speed
220 mm/s
Max Power
Auto
Paper Type
Single color
Number of Endurance Tickets
500
BM Adjustment Value
Unchanged
Color Print Density
100%
Receipt Shooting Flush Time Endless