Specifications

Programmers Guide TH230/TH230+
272
Statistic Report:
Dots Total: total number of printed dots
Dots Actual: number of printed dots with current print head
Printhead Changes: number of changed print lines
Linefeeds Total: total number of executed line feeds in 1/7.52 inch
Linefeeds Actual: number of executed line feeds with current
mechanism
in 1/7.52 inch
Mechanic Changes: number of changed line feed mechanism
Cuts Total: total number of executed cuts
Cuts Actual: number of executed cuts with current cutter unit
Cutter Changes number of changed cutter units
Cutter Errors: Error counter for Cutter Errors (16 bit)
Max. Head Temp.: Maximum head temperature in
o
C
Black Mark Error: Error counter for Black Mark Errors (16 bit)
Thermistor Error: Error counter for Thermistor Errors (16 bit)
Low Voltage Error: Error counter for Low Voltage Errors (16 bit)
High Voltage Error: Error counter for High Voltage Errors (16 bit)
Cover Open: Counter for Cover Open (16 bit)
Firmware starts: number of firmware start actions
Power On (hours): hours of power on time
EEPROM Updates: number of updates in E
2
PROM
EEPROM Status: shows if E
2
PROM checksum is OK
Pixel Test:
Printout of a graphics print pattern to check the print quality regarding missing dots.
There are two different pixel tests dependant of paper width.
(for 80 mm paper width)
(for 57.5 mm paper width)
*** completed ***