Specifications

TH230/230+ Programmer’s Guide
269
The self test printout contains the following information’s (depending on model, version,
etc.):
• Headline (centre, double width): “TH230” / “TH230+”
“Selftest”
Hardware Information’s:
• Manufacturer: “WINCOR-NIXDORF”
• Printer Serial Number: “xxxxxxx”
• PCB Version(TH230): HW dependant (starting with ‘A’)
• Manufactured Board (TH230+): HW dependant (starting with ‘A’)
• PCB production date …
• Interface ID: “nn”
• Interface board: “USB Full Speed”
and optional HW dependant description
RS232 Settings: (only available if a RS232 interface board is used)
• Parameter Baudrate - [Bit length][Parity][Stop bits]
• Handshake communication protocol
• Buffer size description
• Receive Error description
Ethernet Settings: (only available if a Ethernet interface board is used)
• MAC Addr. (fixed) XXXX-XXXX-XXXX
• DHCP enabled/disabled
• IP Address XXX.XXX.XXX
• Net Mask XXX.XXX.XXX
• Gateway XXX.XXX.XXX
• Boot/P enabled/disabled
Software Modules:
• Firmware version / sub version vv.rr
• Booter version and sub version vv.rr
• Loader version and sub version vv.rr
Status: “Verified” or “Unverified”
• Power Up Test and sub version vv.rr
Checksum Status
• Character Font: Name of Character Generator
Version “Version”
Asia Font: (only available if an Asia Character Set is installed)
• Asia Font: Name of Character Generator
Version “Version”
Checksum: Status