Specifications

Programmers Guide TH230/TH230+
264
Ethernet Configuration
In this configuration menu, you can configure the parameters for use with a Ethernet
communication interface.
Menu
Nr.
Description Available Options
4.6.1 Exit
Exit this menu level and gives a save request, if
there are unsaved changes.
4.6.2 DHCP
Enable the “Dynamic Host Configuration
Protocol” to use a automatically assign of IP
address and other configuration information.
Enable DHCP,
Disable DHCP
4.6.3 Boot/P
Enable the “Bootstrap Protocol” to obtain the IP
address via this method.
Enable Boot/P,
Disable Boot/P