Specifications

TH230/230+ Programmer’s Guide
263
RS232 Configuration
In this configuration menu, you can configure the parameters for use with one RS232
communications Interface. This interfaces boards are available with different options.
Menu
Nr.
Description Available Options
4.6.1 Exit
Exit this menu level and gives a save request, if
there are unsaved changes.
4.6.2 Baud Rate
Select the baud rate for serial communication.
[1200, 2400, 4800,
9600,
19200, 38400, 57600,
115200 ] bps
4.6.3 Parity
Select the data parity for serial communication.
No Parity,
Even Parity,
Odd Parity
4.6.4 Flow Control
Select the flow control for serial communication.
DTR/DSR,
ON/XOFF
4.6.5 Bit Length
Select data bit length for serial communication.
7 Bits,
8 Bits
4.6.6 Receive Buffer Capacity
Select the receive buffer capacity (FIFO)
Set Capacity to 4 KB,
Set Capacity to 45 Byte
4.6.7 Receive Error Handling
Select how the printer will react to a receive
error.
Replace Data with ‘?’,
Ignore Data
4.6.8 Print Settings
Prints the actual (in EEPORM stored) settings for
the serial communications interface (RS232)