Specifications

TH230/230+ Programmer’s Guide
261
Print Options
In this menu section is it possible to change some printer parameter. It is very important
to know what effects a change of a value. The procedure to save settings should be read.
To leave this menu, choose “Exit/Save”.
Menu
Nr.
Description Available Options
4.4.1 Exit
Exit this menu level and give a save request, if
there are unsaved changes.
4.4.2 Print Speed
Set the maximum of print speed for power
consumption and print quality.
[70, 100, 130, 160,
190, 220] mm/sec
Print Speed TH230+ Draft
Set the maximum of print speed for power
consumption and print quality.
[70, 100, 130, 160,
190, 220, 260, 300]
mm/sec
4.4.3 Paper Width
Set the used paper width.
New Paper Width 57.5
mm,
New Paper Width 80
mm
4.4.4 Paper Type
Set the used paper type. This value will be valid
without a software reset.
Single Color,
Two Color
4.4.5 Print Density
Set the print density for different paper types.
50%, 70%, 85%,
100%, 115%, 130%
4.4.6 Color Print Density
Set the color print density for the second color if
used a two color paper.
50%, 70%, 85%,
100%, 115%, 130%
4.4.7 Auto Recovery
Selects if and how the printer automatic
recovers from an error.
Off,
Without Clearing,
With Clearing
4.4.8 Receipt Shooting
Select the usage of the TH230 Receipt Shooting.
4.4.8.1 Receipt Shooting Enable/Disable
Enable or disable Receipt Shooting.
Enable Receipt
Shooting,
Disable Receipt
Shooting