Specifications

Programmers Guide TH230/TH230+
258
Configuration - Menu
In this menu section is it possible to change some printer parameter. It is very important
to know what effects the change of a value. The procedure to save settings should be
readed (see 0 Save changed settings – page 248) To leave this menu, choose “Exit/Save”.
Hardware
Menu
Nr.
Description Available Options
4.2.1
Exit/Save
4.2.2 Power Button
Select the function of the power button. If
the power button is disabled, the printer
can’t shut off by the user.
Enable Button, Disable Button
4.2.3 Max. Power
Select the maximum of power what the
printer consume.
Auto, 48 W, 60 W, 75 W, 90
W, 110 W
4.2.4 Black Mark Sensor
Select the usage of the black mark sensor.
Be sure that there is black marked paper
inside. Otherwise, a black mark error will
occur. In this case is the only way to set all
EEPROM Data to default by using the LED
menu (see 0 Set EEPROM to default – page
248)
Enable Black Mark Sensor,
Disable Black Mark Sensor
4.2.5 Endurance Test
Select the start method for endurance test
by using a USB or RS232 - short cut plug
Enable Endurance Test,
Disable Endurance Test
4.2.6
Sleep Mode
4.2.6.2 Sleep Mode Enable/Disable
Enable or disable the Sleep Mode
Enable Sleep Mode,
Disable Sleep Mode
4.2.6.3 Sleep Mode Time
The minimum time to switch automatically
in Sleep Mode
Endless, 10 sec, 30 sec, 1 min,
10 min, 30 min
4.2.6.4 Sleep Mode Interface Power On/Off
The state on power for cash drawer and
customer display during Sleep Mode
Set Sleep Mode Interface
Power On,
Set Sleep Mode Interface
Power Off