Specifications

Programmers Guide TH230/TH230+
16
FS W (Asia version)
Turn quadruple-size mode on/off for Kanji characters 85
GS ETX
Real time request to printer
85
GS EOT Real time status transmission 85
GS ENQ Real time printer status transmission 86
GS !
Select character size
87
GS “ Select memory type (SRAM/Flash) 88
GS “ U
Flash Memory User Sectors Allocation
89
GS # Select the Current Logo 90
GS $
Set absolute vertical print position in page mode
91
GS ( A
Executes test and diagnosis functions
92
GS ( D Enable/disable real-time command 93
GS ( E
Customize NV memory
94
Function 1 Changes into the user setting mode. 96
Function 2 Ends user setting mode session. (Performs a software reset.) 97
Function 3
Changes the memory switch.
98
Function 4 Transmits the host the value for the memory switch. 101
Function 5
Changes the customized setting values.
102
Function 6 Transmits the customized setting values. 109
Function 11 Sets communication condition of serial interface. 114
Function 12
Transmits communication condition of serial interface.
116
Function 129 Set serial number 117
Function 130
Set production date
117
Function 131 Sets communication condition of Ethernet interface. 118
Function 132 Transmits communication condition of Ethernet interface. 119
GS ( FGS ( FGS (
FGS ( FGS ( F
Set adjustment value(s) 120
GS ( L
Specify graphics data
122
Function 48 Sends the entire capacity of NV graphics domains. 126
Function 51
Sends the available capacity of NV graphics memory.
127
Function 64 Sends the key code list for defined NV graphics. 129
Function 65 Performs batch deletion of all NV graphics data. 130
Function 66
Deletes the specified NV graphics data.
131
Function 67 Defines (in raster format) NV graphics data. 132
Function 69
Prints the specified NV graphics.
134
GS * Define downloaded bit image 142
GS / Print downloaded bit image 143
GS :
Start/end macro definition
145
GS @ Erase User Flash Sector 146
GS B
Turn white/black reverse printing mode on/off
147
GS H Select printing position of HRI characters 148
GS I
Transmit printer ID
149
GS L
Set left margin
153
GS P Set horizontal and vertical motion units 154
GS V
Select cut mode and cut paper
155
GS W Set printing area width 157
GS \ Set relative vertical print position in page mode 158
GS ^
Execute macro
159