Specifications

TH230/TH230+ Programmers Guide
15
ESC ? Cancel user-defined characters 53
ESC @
Initialize printer
54
ESC D Set horizontal tab positions 55
ESC E Turn emphasized mode on/off 56
ESC G
Turn double-strike mode on/off
56
ESC I Turn italic print mode on/off 57
ESC J
Print and feed paper
57
ESC K Select Single-Density Graphics 58
ESC L
Select page mode
59
ESC R
Select an international character set
59
ESC S Select standard mode 60
ESC T
Select print direction in page mode
61
ESC V Turn 90° clockwise rotation mode on/off 62
ESC W Set printing area in page mode 63
ESC Y
Select Double-Density Graphics
64
ESC [ ! t Set control point 65
ESC \
Set relative print position
66
ESC a Select justification 67
ESC c 3 Select paper sensor(s) to output paper-end signals 67
ESC c 4
Select paper sensor(s) to stop printing
68
ESC c 5 Enable/disable feed button 69
ESC d
Print and feed n lines
70
ESC i Full cut 70
ESC j Read from Non-Volatile Memory 71
ESC l
Start firmware upgrade mode
71
ESC m Partial cut 71
ESC p
Generate pulse
72
ESC r Set current color 73
ESC s Write to Non-Volatile Memory (NVRAM) 73
ESC t
Select character code table
74
ESC u Transmit Peripheral Device Status 75
ESC v
Transmit paper sensor status
76
ESC w n 7 Receipt shooting flush 77
ESC w n 8 Play melody from flash 77
ESC w n b
Special Wincor barcode parameter
78
ESC w n c Switch the printer into Sleep-Mode. 78
ESC {
Turn upside-down printing mode on/off
79
FS ! (Asia version) Select print mode(s) for Kanji characters 81
FS & (Asia version) Select Kanji character mode 81
FS - (Asia version)
Turn underline mode on/off for Kanji characters
82
FS . (Asia version) Cancel Kanji character mode 82
FS 2 (Asia version)
Define user-defined Kanji characters
83
FS C (Asia version) Select Kanji character code system 84
FS S (Asia version) Set Kanji character spacing 84