Specifications

Programmers Guide TH230/TH230+
14
Command Overview
Code Function Page
HT
Horizontal tab
23
LF Print and line feed 23
FF (1) Print and return to standard mode (in page mode) 24
FF
(2) Print and feed marked paper to print starting position
24
CR Print and carriage return 25
DLE
Clear printer
25
DLE EOT Real time status transmission 26
DLE ENQ Real time request to printer 29
DLE SO (fn = 2)
Turn off the power
30
DC1 Print raster monochrome graphics 31
DC2
Select Double-Wide Characters
31
DC3 Select Single-Wide Characters 32
DC4 Feed n Print Lines 32
NAK
Feed n Dot Rows
32
SYN Add n Extra Dot Rows 33
ETB
Print
33
CAN Cancel print data in page mode 34
EM Full cut 34
SUB
Partial cut
34
ESC (+*.BMP file) Download BMP logo 35
ESC BEL
Generate tone
36
ESC FF Print data in page mode 36
ESC DC2 Select 90 Degree Counter-Clockwise Rotated Print 36
ESC DC4
Set Column
37
ESC SYN Select Pitch (Column Width) 37
ESC SP
Set right-side character spacing
38
ESC !
Select print mode(s)
39
ESC $ Set absolute print position 40
ESC %
Select/cancel user-defined character set
41
ESC & Define user-defined characters 41
ESC ‘
Write to User Data Storage
43
ESC * Select bit-image mode 44
ESC * 1 Select bit-image mode - Line Graphics 46
ESC * b m
Turn on/off TIFF compression
47
ESC - Turn underline mode on/off 48
ESC .
Print Advanced Raster Graphics
49
ESC 2 Set line spacing to 1/6 inch 49
ESC 3 Set line spacing 50
ESC 4
Read from User Data Storage
51
ESC : Copy Character Set from ROM to RAM 51
ESC =
Select peripheral device
52