Specifications

TH230/TH230+ Programmers Guide
11
Absolute Origin of Graphics and Text in Page Mode
The printing area is set by the command ESC W (see page 63). The absolute origin of
graphics and text is the lower left of the printable area. This caused a different behavior:
Text and graphics (for example GS *, ESC (+*.BMP file) and GS ( L) can be printed in
the same row
Print buffer will be print form bottom to top.
Caution:
A graphics will be print with a count of print buffer
If no space to the upper edge for printing the graphics completely, the upper part
of the graphics will be cut.
If the print position in page on the upper edge (depend on print direction (ESC T)),
the print position will be set down with the height of the print buffer. Graphics
which are built with more than one buffer will be cut.
For printing graphics in page, take care for the space to the upper edge and to
upper print lines! If is the space to low, set with GS $ or GS \ the print position to a
better point.
The absolute origin for positioning the print buffer depends on the print direction
(set with ESC T).
TEXT
Graphics
Absolute origin
TEXT
Absolute origin
Graphics buffer 1
Graphics buffer 2
Graphics buffer 3