Specifications

Programmers Guide TH230/TH230+
156
• Function 67: This function can be used for compensation of the head loss
because of the distance between print line and cutting position.
• Function 67: To realize the smallest possible head loss of 5 mm set n to 96
steps (12mm).
• Function 67: The maximum value for backward feed is 96 steps (12 mm).
This reduces the top margin from 17 mm to 5 mm.
• Function 67: programming hints see page 8.
• The vertical motion unit is specified by GS P (see page 154).
• GS V 0: If Black mark sensor is enabled this command cuts paper not at the
mark position. To cut at mark positions please use GS V 65, 66 or 67.