Specifications

TH230/TH230+ Programmers Guide
149
GS I
Function: Transmit printer ID
Code ASCII: GS I n
Code HEX:
0x1D 0x49 n
Range:
1 ≤ n ≤ 4, 49 ≤ n ≤ 52, 65 ≤ n ≤ 68, n = 70, n = 112, 128 ≤ n ≤ 146,
148 ≤ n ≤ 149, 157 ≤ n ≤ 160, 254 ≤ n ≤ 255
Description:
Transmit the specified printer ID.
n specifies the ID of the printer as follows:
n Printer ID Specifications
1,
49
Printer model ID Printer model = 0x24
2,
50
Type ID See table below
3,
51
Firmware version ID 1 Byte – FW version in binary
format in bit 0…bit 3
4,
52
Logo Definition See table below
65 Firmware version String with 6 characters
“_xx.xx”
66 Manufacturer “_WINCOR-NIXDORF”
67
Printer model
“_TH230“ or “_TH230+”
68 Serial number Serial number of the printer
– String
69 ASIA-Character generator name String with max 17
characters
70 Firmware date String format “_DDMMYY”
112
Ignored
Ignored
128 Manufactured Board Number * “_A”..”_Z”, “_AA”..“_AZ”, …
129
Serial number date (Production
date – set by GS ( E pL pH fn
d1…dn (fn=130))
Production date string
“_DDMMYY”
130 Character sets All built in character sets of
the printer (see example
below)
131 Character generator name String with max 17
characters
132 Character generator version String with 6 characters
(_xx.xx)
133 Horizontal resolution “_203 dpi”
134
Vertical resolution
“_203 dpi”