Specifications

TH230/TH230+ Programmers Guide

Diagram of Power States TH230 / TH230+

The following diagram is valid for TH230 and TH230+ and not for iPRINT.

There are different ways, to switch the Printer ON or OFF:

24V = OFF

and Printer = OFF

24V = ON

and Printer = OFF

24V = ON

and Printer = ON

24V = ON

and Power Button is enabled

and press Power Button

24V = ON

and Power Button is enabled

and Printer was ON before

24V = ON

and hit Power Button for 3 seconds

and (Power Button is enabled

or unrecoverable error

or undefined firmware)

24V = ON

and Power Button is enabled

and Printer was OFF before

24V = ON

and Printer = OFF

24V = ON

and Power Button

is disabled

24V = OFF

24V = ON

and DLE SO

and DLE SO is enabled

24V = ON

and press Power Button

and Power Button is enabled

24V = ON

and press Power Button

and Power Button is disabled

Fig.: Power ON and Power OFF

You will find additional information about “Power off control by host” on page 9.