Specifications

Programmers Guide TH230/TH230+
104
BM adjustment value offset (a = 6):
(n
L
+ n
H
* 256)
BM offset
Default
0…127
Offset value with forward direction in
0.125 mm
0
128…255
Offset value with backward direction in
0.125 mm (two's complement)
Maximum power (a = 9):
(n
L
+ n
H
* 256)
Maximum power
Default
0
Auto
Auto
48 … 110
48 W … 110 W
Maximum speed (a = 10):
(n
L
+ n
H
* 256) Maximum speed Default
70 … 220
Speed in mm/sec 220
mm/sec
70 … 300
Speed in mm/sec TH230+
Draft
220
mm/sec
TH230+ High Speed Draft Mode
Values in the range 220 to 300 a only allowed in the TH230+ printer.
This maximum speed is only reached if the print density is lower then
100%.
For example:
300 mm/s is reached with 65% density or less.
260 mm/s is reached with 85% density.
235 mm/s is reached with 100% density.
The reached maximum speed depends on the voltage and the
temperature.
Number of Endurance test tickets (a = 11):
(n
L
+ n
H
* 256) Number of tickets Default
1 … 65534
Number of tickets printed in the
Endurance test
100 tickets