Specifications

TH230/TH230+ Programmers Guide
97
GS ( E p
L
p
H
fn d1 d2 d3 <Function 2>
Code ASCII:
GS ( E p
L
p
H
fn d1 d2 d3
Code HEX: 0x1D 0x28 0x45 0x04 0x00 0x02 0x4F 0x55 0x54
Range: (p
L
+ p
H
× 256) = 4 (p
L
= 4, p
H
= 0)
fn = 2
d1 = 79 = ‘O’
d2 = 85 = ‘U’
d3 = 84 = ‘T’
Description: Ends the user setting mode and the printer performs software reset.
Notes:
• This function is performed only when the printer is in user setting mode.
• After the software reset, the printer goes into the power on state.
• Executing this function enables setting values set in user setting mode
(such as memory switch or customize value).
• Be sure to execute this function after changing all the setting values.
• Be sure to readout the transmit buffer of the printer before sending
this command. This ensures that the data of the “mode change notice”
(see command GS ( E <Function 1>) and possibly ASB messages are
transmitted before the printer executes the software reset.