Specifications

7-1
Chapter 7
Parameter Menus
This chapter describes the programmable parameters, and provides bar codes for
programming and hexadecimal equivalents for host download programming.
Throughout the programming bar code menus, default values are indicated with asterisks
(
*).
Operational Parameters
The MS-3204 is shipped with the default settings shown in Table 7-1 on page 7-3. These
default values are stored in non-volatile memory and are preserved even when the scanner
is powered down.
There are three ways to change the default values:
• Scan the appropriate bar codes in this chapter. These new values replace the
standard default values in memory. To recall the default parameter values, scan the
Set All Defaults bar code on page 7-11.
• Downloading data through the scanner’s serial port using Symbol’s Simple Serial
Interface (SSI). This option is only available for MS-3204 models. Hexadecimal
parameter numbers are shown in this chapter below the parameter title, and
options are shown in parenthesis beneath the accompanying bar codes. See the
Feature/Option
* Indicates Default
*North American, Standard USB Keyboard