Specifications

8-1
Chapter 8
RS-232 Interface (MS-3207 Only)
Introduction
This chapter provides RS-232 host information for setting up the MiniScan scanner, and
only applies to the MS-3207. The RS-232 interface is used to attach the MiniScan scanner
to point-of-sale devices, host computers, or other devices with an available RS-232 port
(e.g., com port).
If your host is not listed in Table 8-2, set the communication parameters to match the host
device. Refer to the documentation for the host device.
This scanner uses TTL RS-232 levels which interfaces with all PCs with no additional
hardware.
Note: Particularly noisy electrical environments may require a cable with
an RS-232 transceiver. To obtain this cable contact the Symbol
Support Center.