Specifications

7-120
MiniScan MS-320X Integration Guide
Host RTS Line State
Parameter # 9Ah
This parameter is used to set the idle state of the Serial Host RTS line.
The SSI Interface is intended to be used with host applications which also implement the
SSI protocol. However, the scanner can be used in a "scan-and-transmit" mode to
communicate with any standard serial communications software on a host PC (see Decode
Data Packet Format on page 7-121). If transmission errors occur in this mode, the host PC
may be asserting hardware handshaking lines which interfere with the SSI protocol. Scan
the HOST: RTS HIGH bar code to address this problem.
*Host: RTS Low
(00h)
Host: RTS High
(01h)