Specifications

7-108
MiniScan MS-320X Integration Guide
Prefix/Suffix Values
Parameter # P = 69h, S1 = 68h, S2 = 6Ah
A prefix and/or one or two suffixes may be appended to scan data for use in data editing.
To set these values, first scan one of the following bar codes, then scan a four-digit number
(i.e., four bar codes from Numeric Bar Codes beginning on page 7-143) that corresponds
to key codes for various terminals. These codes can be found in Table A-1 on page A-1.
To change the selection or to cancel an incorrect entry, scan the Cancel bar code on page
7-145.
Note: In order to use Prefix/Suffix values, first set the Scan Data
Transmission Format (MS-3204). See page 7-110.